158 Open Application jobs in Vietnam

Mô tả công việc:

(Mức lương: Thỏa thuận)

• Hỗ trợ Bộ phận Kinh doanh giới thiệu sản phẩm tới khách hàng, thuyết trình giới thiệu sản phẩm, các tính năng và ứng dụng lâm sàng cho khách hàng.
• Thực hiện đào tạo cho khách hàng về ứng dụng lâm sàng của sản phẩm. Hướng dẫn sử dụng các sản phẩm của công ty, sử dụng thành thạo và khai thác hết các tính năng của sản phẩm.
• Hỗ trợ khách hàng chạy mẫu trực tiếp tại khách hàng khi cần hoặc các thử nghiệm, nghiên cứu khoa học trên thiết bị của công ty.
• Thực hiện đào tạo, cập nhật cho Bộ phận Kinh doanh về sản phẩm và thị trường, thông báo kịp thời về những phát triển mới.
• Giám sát việc sử dụng từng hệ thống, bằng cách liên hệ thường xuyên với người dùng, nhằm giải quyết các vấn đề liên quan đến hoạt động của hệ thống hoặc điều chỉnh hệ thống cho phù hợp với mong muốn đã thay đổi của người dùng. Tham gia vào việc phát triển chức năng mới hoặc phát triển các cài đặt hệ thống được cải tiến.
• Tham gia tổ chức các sự kiện, hội nghị, hội thảo của Công ty. Tham gia các khoá đào tạo do hãng và Công ty tổ chức.
• Tham gia và thực hiện các hoạt động, công việc chung khác của toàn thể công ty.

Chức vụ: Nhân Viên/Chuyên Viên

Hình thức làm việc: Toàn thời gian

Quyền lợi được hưởng:

• Thu nhập theo thỏa thuận (tùy năng lực), xét tăng lương hằng năm
• Tham gia đầy đủ các chế độ bảo hiểm (BHXH, BHYT, BHTN) theo đúng quy định pháp luật
• Tham gia gói Bảo hiểm sức khỏe, Khám sức khỏe định kỳ
• Được trang bị laptop, đồng phục, trang thiết bị phục vụ công việc
• Tham gia các khóa học phát triển bản thân, khóa học nâng cao trình độ chuyên môn,.
• Trợ cấp ăn trưa, xăng xe
• Du lịch hằng năm
• Thưởng lễ tết, lương T13 theo kết quả kinh doanh

Yêu cầu bằng cấp (tối thiểu): Đại Học

Yêu cầu công việc:

• Phẩm chất đạo đức tốt, trung thực, cẩn thận
• Tốt nghiệp đại học chuyên ngành Công nghệ sinh học, sinh học, y – Dược, khối ngành chăm sóc sức khỏe hoặc có bằng cấp tương đương.
• Có kinh nghiệm trong phòng thí nghiệm, có kinh nghiệm vận hành các thiết bị bệnh viện hoặc chăm sóc sức khỏe là một lợi thế.
• Thành thạo vi tính, các phần mềm quản lý dữ liệu
• Có kỹ năng lên kế hoạch và báo cáo phân tích
• Có kỹ năng giao tiếp, thuyết trình tốt.
• Đọc hiểu tài liệu ngoại ngữ Tiếng Anh.

Yêu cầu giới tính: Nam/Nữ

Ngành nghề: Công Nghệ Sinh Học,Hóa Học/Hóa Chất,Hoá Sinh,Khoa Học/Kỹ Thuật,Kỹ Thuật Công Nghiệp,Y Tế

Đại Học

Dưới 2 năm

Exciting Opportunity for an Application Engineer at Akselos

Akselos is a rapidly growing digital technology company with headquarters in Europe and operations in Southeast Asia and the USA. We've created the world's most advanced engineering modeling and fastest simulation technology to protect the world's critical infrastructure today and tomorrow. Focused on revolutionizing the Energy market, our technology pushes the boundaries of modern engineering and data analytics.

Position: Application Engineer

Location: Vietnam

Join Us and Make a Difference

As an Application Engineer at Akselos, you will:

• Design, build, and test computational components for innovative simulation software.
• Develop or modify CAD models for industrial applications.
• Generate Akselos-compatible component meshes for computational analysis.
• Conduct finite element calculations using in-house and industry-standard tools.
• Enhance and improve Akselos tools through testing and software development.
• Analyze structural and thermal problems using finite element modeling techniques.

What We're Looking For:

• Bachelor's degree in Engineering Mechanics, Aerospace Engineering, Mechanical Engineering, or a related field.
• 1–2 years of experience in engineering applications or software development. Candidates with more experience may be considered for Senior or Lead roles.
• Familiarity with 3D CAD Modeling processes.
• Possess a solid foundation in finite element analysis (FEA) workflows.
• Good communication skills in English and ability to work effectively within a global team.
• Coding skills in popular programming languages (a plus but not mandatory).

Why Akselos?

• Competitive salary package including a 13-month salary.
• Performance-based bonuses
• Full package of social and health insurance
• Comprehensive advanced health insurance for you and your family
• Annual premium medical check-ups at international hospitals.
• Parking subsidy together with free coffee in the office
• Extra leave types: family care, bereavement, wedding, religious leaves, and more.
• Exciting employee engagement activities: company trips, team building, football, and badminton matches.
• Plenty of learning and development opportunities, including sponsorship for a second bachelor's or master's degree, if qualified.
• A young and dynamic work environment with a supportive and collaborative team where you could learn and grow.

Ready to Join the Revolution?

How to apply:

• Please visit our Career Page:
• Deadline: October 30, 2025

Contact information if you have any questions:

• Mrs. Minh-Ha Vu - Email:

Show Us Your Talent Please include a cover letter highlighting the exciting projects you've led or contributed to.

Mô tả công việc:

(Mức lương: Thỏa thuận)

• Đánh giá bảo mật ứng dụng và lập mô hình mối đe doạ Threat Modeling cho các môi trường On-premise, Cloud, Hybrid.
• Tham gia lập kế hoạch, thiết kế kiến trúc, triển khai các hệ thống bảo mật đảm bảo an toàn, an ninh cho hệ thống
• Đánh giá rủi ro, báo cáo, theo dõi tình trạng hệ thống, các sự cố bảo mật, điểm yếu lỗ hổng bảo mật để đề xuất với lãnh đạo biện pháp khắc phục ngắn/dài hạn hoặc giảm thiểu rủi ro về an ninh bảo mật cho ứng dụng
• Kiểm thử mã nguồn, đánh giá an ninh ứng dụng trước/sau triển khai.
• Phân tích lỗi 1-day và viết payload khai thác.
• Xây dựng quy trình, chính sách an ninh thông tin nội bộ.

Chức vụ: Nhân Viên/Chuyên Viên

Hình thức làm việc: Toàn thời gian

Quyền lợi được hưởng:

• Hưởng thu nhập cạnh tranh, hấp dẫn theo năng lực của bản thân.
• Thưởng tháng 13 và thưởng cuối năm theo thành tích công việc.
• Được đóng bảo hiểm đầy đủ theo quy định và bảo hiểm sức khỏe Sun Care 24/7.
• Được ưu đãi đặc biệt khi sử dụng dịch vụ trong hệ sinh thái của Sun Group trên toàn quốc như: Sun World, Sun Hospitality, Bệnh viện Mặt trời. cho bản thân và gia đình theo chế độ dành cho CBNV.
• Hưởng chính sách Thâm niên, An cư lạc nghiệp – cấp nhà ở cho CBNV (100% giá trị)
• Được đào tạo nâng cao nghiệp vụ, cơ hội phát triển nghề nghiệp.
• Được làm việc trong môi trường chuyên nghiệp, năng động và hiệu quả

Yêu cầu bằng cấp (tối thiểu): Trung cấp - Nghề

Yêu cầu công việc:

• Tốt nghiệp Đại học trở lên, chuyên ngành: An toàn thông tin, Công nghệ phần mềm
• 3+ năm kinh nghiệm trong lĩnh vực an ninh bảo mật.
• Có kiến thức triển khai Security trên môi trường Cloud: AWS, Microsoft Azure.
• Có kinh nghiệm làm bảo mật hệ thống OT, IoT, Manufactory
• Đọc hiểu tài liệu tiếng Anh chuyên ngành
• Hiểu biết CSDL, ISO-27001, NIST và các chính sách/quy trình ATTT
• Ưu tiên ứng viên có chứng chỉ về ATTT (CEH, OSCP, CISSP, vv.)

Yêu cầu giới tính: Nam/Nữ

Ngành nghề: An Ninh Mạng,IT Phần Cứng,Quản Trị Hệ Thống

Trung cấp - Nghề

Không yêu cầu

Mô tả công việc:

(Mức lương: Thỏa thuận)

(MASTERCAM/ HEXAGON)

We are seeking a passionate and dynamic Application Engineer with a strong interest in mechanical engineering and technology. As a key member of our team, you will collaborate closely with engineers across various disciplines, both to enhance your own skills and to support others in their work. If you're looking for a long-term career with growth opportunities, we'd love to have you on board

• Customer Needs:Identify customer requirements to offer tailored solutions.
• Software Implementation: Oversee the implementation and integration of software at client sites.
• Consultation & Support: Provide expert consultation on CAD software, offering manufacturing solutions to clients. Provide both remote and on-site support as needed.
• Product Demonstrations: Conduct pre-sales demonstrations to showcase our products and solutions to potential clients.
• Training & Post-Sale Support: Provide training sessions and ongoing support for clients after product installation.
• Customer Liaison: Serve as the bridge between customers and our product team, particularly for large enterprise accounts, to strengthen sales relationships.
• Cross-Department Collaboration: Work closely with marketing and sale teams to understand customer needs, strategize tailored solutions, and ensure successful product delivery.
• Reporting: Report key business results and progress to leadership.
• Additional tasks: Perform other responsibilities as required by supervisors.

Chức vụ: Nhân Viên/Chuyên Viên

Hình thức làm việc: Toàn thời gian

Quyền lợi được hưởng:

• Global Work Environment: Experience an international workplace with a diverse and dynamic team.
• Competitive Compensation: Salary and bonuses based on experience and capabilities, including a 13th-month salary.
• Paid Time Off: 15 days of annual leave.
• Allowances: Mobile and transport allowances.
• Career Growth Opportunities: Engage with leading companies and expand your professional network through business trips, kick-off events, and have opportunities for training in Vietnam and abroad (e.g., the US, Singapore).
• Employee Perks: Gifts for festivals and birthdays, as well as other employee benefits.
• Social Insurance: Comprehensive social insurance in compliance with labor laws.
• Networking Opportunities: Build relationships with industry leaders in the CAD/CAM software sector.
• International Training: Opportunities for training and events in Vietnam and overseas (e.g., Singapore, Malaysia, Thailand) with company experts.

Yêu cầu bằng cấp (tối thiểu): Đại Học

Yêu cầu công việc:

• Advanced English Communication: Ability to communicate effectively in English, both written and spoken.
• Educational Background: Bachelor's degree in mechanical engineering, Production Design, Industrial Engineering, or a related field.
• CAD/CAM Software Knowledge: Solid understanding of CAD/CAM software; experience with Mastercam, Visi Cam, Work NC, Cimatron, NX, PTC CREO or similar software is a plus.
• CNC Machining Knowledge: Familiarity with CNC machining and making post processors is a plus.
• Business Trip Availability: Willingness to go for business purposes.

Yêu cầu giới tính: Nam/Nữ

Ngành nghề: Cơ Khí - Chế Tạo Máy,Cơ Điện Tử,Kỹ Thuật Ô Tô,Kỹ Thuật Sản Xuất - Bảo Trì,Thiết Kế Sản Phẩm - Công Nghiệp,Tự Động Hóa - Robot

Đại Học

2 - 5 năm

Mô tả công việc:

(Mức lương: triệu VNĐ)

Navigos Search's Client is looking for a technically driven and customer-focused Application Engineer to join our dynamic team. You will be a key technical interface between our solutions and our clients, supporting both pre-sales and post-sales activities. This role involves deep engagement in solution development, training delivery, and cross-functional collaboration with regional teams.
• Work closely with customers to understand their technical needs and recommend suitable solutions

• Conduct hands-on product demonstrations, benchmarking, and technical workshops for clients and internal teams
• Design and implement application setups tailored to specific use cases or industry requirements
• Produce technical documentation, such as application briefs and user guidance materials
• Monitor market trends and emerging technologies to identify opportunities for application innovation
• Deliver prompt technical support through both on-site visits and remote channels
• Assist sales and marketing teams with product positioning, events, and technical content
• Support internal teams with product knowledge, testing scenarios, and solution customization
• Participate in ongoing training programs to continuously improve technical expertise
• Collaborate with regional sales and technical teams to ensure consistency and knowledge sharing
• Contribute to the development of advanced test strategies and measurement methodologies
• Maintain up-to-date knowledge of our product portfolio and their applications across industries
• Keep abreast of cutting-edge technologies relevant to your application area
• Take on additional technical tasks or initiatives as assigned by management

Chức vụ: Nhân Viên/Chuyên Viên

Hình thức làm việc: Toàn thời gian

Quyền lợi được hưởng:

13th monthly salary, Performance Bonus

Healthcare Plan and Insurance package

Refer to company training plan for staff

Yêu cầu bằng cấp (tối thiểu): Trung cấp - Nghề

Yêu cầu công việc:

• Solid understanding of RF principles and general electronics
• Proficient in at least one programming language (e.g., Python, C/C++, MATLAB, or similar)
• Hands-on experience with T&M equipment or wireless communication systems is a strong plus
• Strong ability to write clear, concise technical documents and reports
• Confident in delivering presentations and leading technical discussions
• Familiarity with test and measurement instruments and their practical applications
• Good command of both spoken and written English
• Self-motivated, responsible, and able to take initiative
• Detail-oriented and dependable with strong problem-solving skills
• Excellent communication and interpersonal abilities
• Comfortable working independently and collaboratively in a regional team environment

Yêu cầu giới tính: Nam/Nữ

Ngành nghề: Bưu Chính Viễn Thông,Viễn Thông,Điện/Điện Tử/Điện Lạnh

Trung cấp - Nghề

Không yêu cầu

Mô tả công việc:

(Mức lương: Thỏa thuận)

(MASTERCAM/ HEXAGON)

We are seeking a passionate and dynamic Application Engineer with a strong interest in mechanical engineering and technology. As a key member of our team, you will collaborate closely with engineers across various disciplines, both to enhance your own skills and to support others in their work. If you're looking for a long-term career with growth opportunities, we'd love to have you on board

• Customer Needs:Identify customer requirements to offer tailored solutions.
• Software Implementation: Oversee the implementation and integration of software at client sites.
• Consultation & Support: Provide expert consultation on CAD software, offering manufacturing solutions to clients. Provide both remote and on-site support as needed.
• Product Demonstrations: Conduct pre-sales demonstrations to showcase our products and solutions to potential clients.
• Training & Post-Sale Support: Provide training sessions and ongoing support for clients after product installation.
• Customer Liaison: Serve as the bridge between customers and our product team, particularly for large enterprise accounts, to strengthen sales relationships.
• Cross-Department Collaboration: Work closely with marketing and sale teams to understand customer needs, strategize tailored solutions, and ensure successful product delivery.
• Reporting: Report key business results and progress to leadership.
• Additional tasks: Perform other responsibilities as required by supervisors.

Chức vụ: Nhân Viên/Chuyên Viên

Hình thức làm việc: Toàn thời gian

Quyền lợi được hưởng:

• Global Work Environment: Experience an international workplace with a diverse and dynamic team.
• Competitive Compensation: Salary and bonuses based on experience and capabilities, including a 13th-month salary.
• Paid Time Off: 15 days of annual leave.
• Allowances: Mobile and transport allowances.
• Career Growth Opportunities: Engage with leading companies and expand your professional network through business trips, kick-off events, and have opportunities for training in Vietnam and abroad (e.g., the US, Singapore).
• Employee Perks: Gifts for festivals and birthdays, as well as other employee benefits.
• Social Insurance: Comprehensive social insurance in compliance with labor laws.
• Networking Opportunities: Build relationships with industry leaders in the CAD/CAM software sector.
• International Training: Opportunities for training and events in Vietnam and overseas (e.g., Singapore, Malaysia, Thailand) with company experts.

Yêu cầu bằng cấp (tối thiểu): Đại Học

Yêu cầu công việc:

• Advanced English Communication: Ability to communicate effectively in English, both written and spoken.
• Educational Background: Bachelor's degree in mechanical engineering, Production Design, Industrial Engineering, or a related field.
• CAD/CAM Software Knowledge: Solid understanding of CAD/CAM software; experience with Mastercam, Visi Cam, Work NC, Cimatron, NX, PTC CREO or similar software is a plus.
• CNC Machining Knowledge: Familiarity with CNC machining and making post processors is a plus.
• Business Trip Availability: Willingness to go for business purposes.

Yêu cầu giới tính: Nam/Nữ

Ngành nghề: Cơ Khí - Chế Tạo Máy,Cơ Điện Tử,Kỹ Thuật Ô Tô,Kỹ Thuật Sản Xuất - Bảo Trì,Thiết Kế Sản Phẩm - Công Nghiệp,Tự Động Hóa - Robot

Đại Học

2 - 5 năm

Job Description Summary
Job Description

Job Title:
Application Manager – Diagnostics

Location:
Ho Chi Minh, Vietnam

Job Summary:
The Application Manager will lead the application support for BD Diagnostics products in Vietnam. This role ensures the successful implementation, training, and ongoing support of BD's diagnostic and research solutions, working closely with customers, sales teams, and regional/global stakeholders to drive customer satisfaction and business growth.

Key Responsibilities:

• Application Leadership & Support:

• Lead, mentor, and manage a team of application specialists and technical support staff.

• Set performance goals, conduct regular evaluations, and support career development.

• Foster a collaborative and high-performing team culture aligned with BD's values.

• Training & Education:

• Develop and deliver training programs for customers, distributors, and internal teams.

• Create and maintain technical documentation, user guides, and training materials.

• Marketing and Sale Support

• Understanding requirements of customer's experiment and provide appropriate technical and product solutions through discussions, presentations and/or product/application demonstrations to positively impact sales and increase productivity.
• Co-ordinate / support / lead awareness activities such as seminars, conference

• Continuously track competitor activity and scan the market environment for developing trends and practices and emerging business opportunities.

• Project Management:

• Manage application-related aspects of product installations and implementations.

• Coordinate with cross-functional teams to ensure timely and successful project delivery.

• Customer Engagement:

• Build strong relationships with key opinion leaders (KOLs), laboratory managers, and clinicians.

• Gather customer feedback and relay insights to regional product and R&D teams.

• Compliance & Quality:

• Ensure all activities comply with BD's quality standards, regulatory requirements, and safety protocols.

Qualifications:

• Bachelor's or Master's degree in Biotechnology, Medical Technology , Laboratory Medicine Technique or related field.
• Minimum 5 years of experience in application support, technical service, or clinical laboratory operations in clinical diagnostics industry or hospitals
• Strong knowledge of clinical diagnostics, clinical microbiology or molecular biology is preferred.
• Experience working with healthcare institutions and clinical laboratories in Vietnam is a plus.

Skills & Competencies:

• Excellent communication and presentation skills in both Vietnamese and English.
• Strong problem-solving and analytical thinking.
• Ability to manage multiple projects and prioritize effectively.
• Customer-focused mindset with a passion for healthcare innovation.
• Willingness to travel domestically and occasionally internationally.
• Strong understanding of the medical device market and regulatory environment in Vietnam.
• Excellent communication, negotiation, and relationship-building skills.
• Ability to work independently and as part of a team.
• Willingness to travel across North region, and across country
• Proficiency in English and Vietnamese.

Preferred Qualifications:

• Experience working with Laboratory medical devices company.
• Willing to travel across Vietnam when needed.

Required Skills
Optional Skills

Primary Work Location

VNM Ho Chi Minh City - Me Linh Point Tower

Additional Locations

Work Shift

PRIMARY RESPONSIBILITIES

1. Analyze business and technical requirements from end users or departments.

2. Design and develop customized software applications or integrate with existing systems.

3. Install and deploy software in real-world environments.

4. Maintain, update, and debug software to ensure performance and stability.

5. Propose system improvements based on usage data analysis and user feedback.

6. Write technical documentation and user manuals for the software.

7. Maintain security related to information processed, stored, or accessed over the network.

8. Document programming issues and solutions for future reference.

ADDITIONAL RESPONSIBILITIES

1. Deliver user instructions and documentation for application software developed independently.

2. Qualifications

• Education: Bachelor's degree in information technology, Software Engineering, Computer Science, Information Systems, or a related field.

• Experience

• Minimum of 5 years of experience in programming, software development, and participation in IT projects in various roles such as Business Analyst (BA), Developer (DEV), etc.

• Experience and understanding of IT systems in manufacturing companies is a plus.

• Proficient in popular programming languages such as Python, C#, JavaScript.

• Experienced in working with database environments such as SQL, Oracle, MySQL.

• Skilled in system analysis and design.

-Skills

• Ability to work under high pressure.

• Strong skills in technical documentation and presentation.

• Good communication skills.

• Excellent problem-solving and teamwork abilities.

• Other Skills

• Capable of working independently and in team environments.

• Able to handle high workloads and pressure effectively.

Note: 1 year Contract

Location:
 Lot 41A & B, Quang Minh IZ, Mê Linh

Date: Sep 30, 2025

Location: VN,

Company: Corning

The company built on breakthroughs.

Join us.

Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible.

How do we do this? With our people. They break through limitations and expectations – not once in a career, but every day. They help move our company, and the world, forward.

At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more.

Come break through with us.

Corning's businesses are ever evolving to best serve our customers, industries, and consumers. Today, we accelerate and transform life sciences, mobile consumer electronics, optical communications, display, and automotive markets. We are changing the world with:

• Trusted products that accelerate drug discovery, development, and delivery to save lives
• Damage-resistant cover glass to enhance the devices that keep us connected
• Optical fiber, wireless technologies, and connectivity solutions to carry information and ideas at the speed of light
• Precision glass for advanced displays to deliver richer experiences
• Auto glass and ceramics to drive cleaner, safer, and smarter transportation

Purpose of the Position:

This role will provide technical support to customers / New Glass Technical Transfer/Cover Glass Parts/Finishing/ Process development/Troubleshooting in both Finishers and TPMs.

Day to Day Responsibilities:

• Handle customer technical issues and build up working relationship at all levels

• Coordinates with sales team to ensure seamless support and service to the customer

• Deliver solutions to resolve technical issues and escalate to appropriate level if necessary

• Negotiate and close technical specifications with customers

• Manage Cover Glass parts, glass finishing business and process

• Provide technical training to ODMs, TPMs and finishers

• Develops knowledge of material, process and/or equipment in focused areas of manufacturing or engineering

• Problem solving and process improvement using structured problem-solving methods

• Provides disciplined project leadership across multiple stages of innovation for new product, process, cost reduction and capacity improvement initiatives

• Manage project resources to achieve project deliverables and timeline

Education & Experience:

• Bachelor's degree with Material Engineering, Physics, Chemistry, Electronics, Mechanical Engineering

• 5 years working experience in Mobile Phone business, glass finishing industry, cover glass cutting/polishing/coating, LCD, Touch Panel, semiconductor business.

Required Skills:

• Dare to face challenge

• Good communication and negotiation skill. Candidate will need to liaise with colleagues in China, Taiwan, SEA.

• Self-motivated, particularly under pressure

• Problem solving skill and analytical skills

• Good at English & Chinese

Desired Skills:

• Strong influence

• Good project management skill

• Self-motivated and disciplined

• Demonstrated accomplishment in working across functions, regions, and cultures

• Knowledge on reliability and brittle materials

• Familiar with Minitab, Excel and other statistical tool

Soft Skills:

• Good communication and negotiation skill

• Strong influence

• Professional customer engagement

• Effective customer and internal communications

Travel Requirements:

• National: 50% travel in North Vietnam
• International: <10%